Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonFueling is off - clean or replace the sensor soon.
Your second airflow sensor has an electrical fault. Expect rough running and poor fuel economy.
Key facts
P010A means mAF sensor 'B' circuit fault. Your second airflow sensor has an electrical fault. Expect rough running and poor fuel economy. WrenchFair's published fair-price range for this repair is $60–$250 parts and $80–$200 labor at independent shops.
WrenchFair rates P010A a 2-of-5 DIY difficulty (“Clean the sensor first with MAF cleaner; confirm dual MAF sensors on your engine.”) with a “Diagnose soon” driveability rating: Fueling is off - clean or replace the sensor soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
rough idle
hesitation
poor fuel economy
Likely causes
Failed 'B' MAF sensor (most common)
Damaged wiring or connector
Open or short in the sensor circuit
Contaminated sensing element
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Confirm your engine has dual MAF sensors
Clean the 'B' MAF sensor with dedicated cleaner
Inspect the wiring and connector for damage Tests: Damaged wiring or connector
Check for opens or shorts in the circuit Tests: Open or short in the sensor circuit
Compare 'A' and 'B' readings; replace the 'B' sensor if it's dead
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $250
Labor$80 – $200
MAF sensor 'B' cleaning or replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P010A ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Clean the sensor first with MAF cleaner; confirm dual MAF sensors on your engine.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →