P00A1: Charge air cooler temperature sensor range/performance, bank 2
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonFueling and boost math is degraded - diagnose soon.
Your bank-2 intercooler temperature sensor is reading something unbelievable - usually oil-fouled or drifted.
Key facts
P00A1 means charge air cooler temperature sensor range/performance, bank 2. Your bank-2 intercooler temperature sensor is reading something unbelievable - usually oil-fouled or drifted. WrenchFair's published fair-price range for this repair is $25–$120 parts and $80–$180 labor at independent shops.
WrenchFair rates P00A1 a 2-of-5 DIY difficulty (“Pull the sensor and check for oil fouling before replacing it.”) with a “Diagnose soon” driveability rating: Fueling and boost math is degraded - diagnose soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
reduced power
poor fuel economy
Likely causes
Oil-fouled bank-2 sensor (most common)
Drifting/failing sensor
Sensor dislodged from the charge pipe
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Remove the sensor and check for oil fouling - clean and retest
Verify proper seating in the charge pipe Tests: Sensor dislodged from the charge pipe
Compare to the bank-1 reading after a cold soak
Replace the sensor if it reads wrong when clean
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$25 – $120
Labor$80 – $180
Charge air temperature sensor cleaning or replacement (bank 2). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P00A1 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Pull the sensor and check for oil fouling before replacing it.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →