Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonAny fuel leak is a fire risk - fix it promptly and don't park over dry leaves.
The computer detected a small fuel leak - a weeping injector or line fitting. Fuel leaks are a fire hazard - find it.
Key facts
P0094 means fuel system leak detected - small leak. The computer detected a small fuel leak - a weeping injector or line fitting. Fuel leaks are a fire hazard - find it. WrenchFair's published fair-price range for this repair is $20–$300 parts and $100–$400 labor at independent shops.
WrenchFair rates P0094 a 3-of-5 DIY difficulty (“Inspect with the engine running - leaks show as wetness.”) with a “Diagnose soon” driveability rating: Any fuel leak is a fire risk - fix it promptly and don't park over dry leaves. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
fuel smell
visible wet spots on fuel components
Likely causes
Weeping fuel injector (most common)
Leaking fuel line fitting
Seeping fuel rail connection
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Inspect all fuel lines, fittings, and injectors for wetness with the engine running Tests: Leaking fuel line fitting
Smell for fuel around the engine
Replace leaking seals, lines, or injectors Tests: Leaking fuel line fitting
Clean up and re-verify no leak remains
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $300
Labor$100 – $400
Fuel leak repair - seals, lines, or injector depending on source. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0094 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Inspect with the engine running - leaks show as wetness.
Pro tip: Relieve fuel pressure first (pull the pump fuse, run the engine until it stalls). Work cold, battery disconnected, extinguisher within reach — no power tools near open fuel.
As an Amazon Associate, WrenchFair earns from qualifying purchases.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →