P0071

P0071: Ambient air temperature sensor range/performance

DIY difficulty 1/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your outside-temperature sensor is reading something unbelievable - it's probably been knocked loose or is heat-soaked. The dashboard temp display will be wrong.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Find the sensor and check it's properly mounted in free airflow, not dangling near the radiator Tests: Sensor knocked out of its mounting and heat-soaking near the radiator (most common)
  2. Clean any debris caked on the sensor Tests: Sensor caked with debris
  3. After a cold soak, compare its reading to actual ambient temperature Tests: Drifting/failing ambient temperature sensor
  4. Replace the sensor if it reads wrong while properly positioned

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$15 – $60
Labor$50 – $120

Ambient air temperature sensor replacement or repositioning. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0071 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

1 of 5 — Check the sensor's physical position before replacing anything.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →