P0065: Air-assisted injector control range/performance
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonCold-start driveability and emissions suffer - address it at your convenience.
The air-assist system that helps your injectors atomize fuel isn't working right - usually a clogged air passage or weak air pump. Expect rough cold starts and higher emissions.
Model notes: Found on some older emissions-focused designs (certain Suzuki, GM, and other applications). Most modern cars don't have this system.
Key facts
P0065 means air-assisted injector control range/performance. The air-assist system that helps your injectors atomize fuel isn't working right - usually a clogged air passage or weak air pump. Expect rough cold starts and higher emissions. WrenchFair's published fair-price range for this repair is $80–$400 parts and $100–$350 labor at independent shops.
WrenchFair rates P0065 a 3-of-5 DIY difficulty (“Air-assisted injection is uncommon; the factory manual's test procedure is worth following exactly.”) with a “Diagnose soon” driveability rating: Cold-start driveability and emissions suffer - address it at your convenience. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
rough cold start
increased emissions
possible misfire on cold start
Likely causes
Clogged air-assist passages in the injector (most common)
Weak or failing air-assist pump
Leaking or disconnected air supply line
Sticking air-assist control solenoid
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Confirm your vehicle uses air-assisted injectors Tests: Clogged air-assist passages in the injector (most common)
Inspect the air supply lines for leaks or disconnection Tests: Leaking or disconnected air supply line
Test the air-assist pump output Tests: Weak or failing air-assist pump
Check the control solenoid operation Tests: Sticking air-assist control solenoid
Clean or replace clogged injectors or a weak pump as indicated
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $400
Labor$100 – $350
Air-assist pump or injector service/replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0065 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Air-assisted injection is uncommon; the factory manual's test procedure is worth following exactly.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →