P005D

P005D: B camshaft profile actuator stuck on, bank 2

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Can I drive with P005D?

Can I drive with a P005D code?

Short trips and gentle driving only, until you know the cause. Running stuck in the engaged profile hurts economy and low-speed manners - diagnose it before it fouls plugs or the catalyst. If the check-engine light starts flashing, the engine shakes badly, or the car loses significant power, pull over safely and have it towed.

How serious is P005D?

Moderate. WrenchFair rates this one “Diagnose soon” — the car can usually get you home, but driving on it can turn a cheap fix into an expensive one. Running stuck in the engaged profile hurts economy and low-speed manners - diagnose it before it fouls plugs or the catalyst.

Will P005D go away on its own?

The warning light can turn off by itself after clean drive cycles, but the code stays stored in the computer's memory and the fault is still there. Clearing it without fixing the cause just buys time — it will come back when the computer re-runs the self-test. Exception: a loose gas cap — tighten it and drive a few days.

The mechanism that switches your exhaust camshaft's valve lift is jammed in the engaged position on the bank-2 side and won't switch back.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Change oil and filter with the exact factory viscosity, clear the code, and retest Tests: Dirty or wrong-viscosity oil
  2. Command the profile off with a bi-directional scan tool and watch whether the actuator releases Tests: Profile actuator solenoid stuck open (most common)
  3. Remove and inspect the bank 2 exhaust profile solenoid for a stuck-open pintle Tests: Profile actuator solenoid stuck open (most common)
  4. Check for sludge or debris in the actuator oil passages Tests: Debris or sludge jamming the switchable rocker/lifter engaged
  5. Inspect the switchable rocker/lifter mechanism for jamming or wear

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$60 – $500
Labor$100 – $600

Profile actuator solenoid replacement or oil system service; internal rocker/lifter work costs more. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P005D ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Oil service first; a mechanically jammed mechanism means valve-cover-off work.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →