P0023: Exhaust camshaft actuator circuit fault, bank 2
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonFixed cam timing costs performance and economy - repair it, but it's not an emergency stop.
The electric valve that adjusts your exhaust camshaft timing on the bank-2 side has an electrical fault - usually the solenoid itself or its wiring.
Key facts
P0023 means exhaust camshaft actuator circuit fault, bank 2. The electric valve that adjusts your exhaust camshaft timing on the bank-2 side has an electrical fault - usually the solenoid itself or its wiring. WrenchFair's published fair-price range for this repair is $40–$150 parts and $80–$250 labor at independent shops.
WrenchFair rates P0023 a 2-of-5 DIY difficulty (“Same straightforward solenoid-and-wiring diagnosis as P0013, on bank 2.”) with a “Diagnose soon” driveability rating: Fixed cam timing costs performance and economy - repair it, but it's not an emergency stop. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
rough running
poor acceleration
decreased fuel economy
Likely causes
Failed VVT oil control valve (solenoid) for the bank 2 exhaust camshaft (most common)
Open or shorted wiring in the actuator circuit
Corroded or loose connector at the solenoid
Blown fuse feeding the solenoid circuit
PCM fault (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Inspect the bank 2 exhaust VVT solenoid wiring and connector for damage or corrosion Tests: Failed VVT oil control valve (solenoid) for the bank 2 exhaust camshaft (most common)
Check the fuse feeding the VVT solenoid circuit Tests: Blown fuse feeding the solenoid circuit
Unplug the solenoid and measure winding resistance against factory spec Tests: Failed VVT oil control valve (solenoid) for the bank 2 exhaust camshaft (most common)
Check harness continuity back to the PCM and test for shorts
Command the solenoid with a bi-directional scan tool if available; replace it if it doesn't respond
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $150
Labor$80 – $250
VVT oil control valve (solenoid) replacement for the bank 2 exhaust camshaft. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0023 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Same straightforward solenoid-and-wiring diagnosis as P0013, on bank 2.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →