P000B

P000B: B camshaft position slow response bank 1

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The gadget that adjusts your exhaust camshaft timing is reacting too slowly - almost always because of dirty or low engine oil gumming up the works. Fresh oil and a new filter fix it more often than you'd think.

Model notes: Seen across many makes with VVT (GM, Ford, Chrysler, VW/Audi, Subaru). 'B' is usually the exhaust camshaft; 'A' is usually intake.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check oil level and condition first - if it's low, dirty, or the wrong viscosity, change oil and filter, clear the code, and drive it
  2. With a scan tool, watch commanded vs. actual bank 1 exhaust camshaft angle during a snap-throttle - a lazy trace confirms slow response Tests: Worn camshaft phaser that can't advance/retard crisply
  3. Inspect the VVT oil control valve and its screen for sludge; clean or replace the valve Tests: Clogged or sticking VVT oil control valve (solenoid)
  4. Check the camshaft position sensor connector and wiring for damage or oil intrusion Tests: Faulty camshaft position sensor or damaged wiring
  5. If response is still slow with clean oil and a good valve, suspect a worn phaser or stretched timing chain

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$40 – $250
Labor$80 – $300

Engine oil change or VVT oil control valve (solenoid) replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P000B ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Start with an oil change - it genuinely fixes many of these. Solenoid replacement is usually accessible; phaser work is deeper.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →