Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonFuel shutoff control is a no-start risk - diagnose it rather than driving on hope.
The wire controlling your fuel shutoff valve is reading too much voltage - probably shorted to a power wire. The valve may not respond to commands.
Key facts
P0007 means fuel shutoff valve A control circuit high. The wire controlling your fuel shutoff valve is reading too much voltage - probably shorted to a power wire. The valve may not respond to commands. WrenchFair's published fair-price range for this repair is $60–$250 parts and $120–$300 labor at independent shops.
WrenchFair rates P0007 a 3-of-5 DIY difficulty (“Short-to-power diagnosis with a multimeter; the hard part is finding documentation for this uncommon code.”) with a “Diagnose soon” driveability rating: Fuel shutoff control is a no-start risk - diagnose it rather than driving on hope. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
hard starting
engine may not shut off cleanly or may not start
Likely causes
Control wire shorted to battery voltage
Failed fuel shutoff valve solenoid
Damaged or corroded connector
Failed PCM driver (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check the fuse for the shutoff valve circuit Tests: Failed fuel shutoff valve solenoid
With the key on and the valve unplugged, check whether battery voltage is present on the control wire where it shouldn't be Tests: Control wire shorted to battery voltage
Trace the harness for chafing against power feeds
Test the valve solenoid resistance against factory spec Tests: Failed fuel shutoff valve solenoid
Inspect connectors for damage, corrosion, or bent pins
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $250
Labor$120 – $300
Fuel shutoff valve replacement or wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0007 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Short-to-power diagnosis with a multimeter; the hard part is finding documentation for this uncommon code.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →