Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonSway control is degraded — slow down, balance the trailer load, and avoid sudden maneuvers.
A trailer or stability warning comes on. The system that brakes individual wheels to calm trailer sway may not intervene.
Key facts
C0860 means trailer Stability Assist Performance. A trailer or stability warning comes on. The system that brakes individual wheels to calm trailer sway may not intervene. WrenchFair's published fair-price range for this repair is $80–$500 parts and $100–$300 labor at independent shops.
WrenchFair rates C0860 a 3-of-5 DIY difficulty (“Check the trailer connection and companion codes first — the function depends on good data.”) with a “Diagnose soon” driveability rating: Sway control is degraded — slow down, balance the trailer load, and avoid sudden maneuvers. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
trailer stability warning
stability control light on while towing
sway mitigation may not intervene
Likely causes
trailer module communication fault
yaw sensor drift
wiring fault
incorrect trailer wiring
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Inspect the trailer connector for corrosion or damage. Tests: trailer module communication fault
2. Read companion codes in the trailer and stability modules. Tests: trailer module communication fault
3. Verify the yaw sensor reads plausibly in live data.
4. Repair the communication or sensor fault. Tests: trailer module communication fault
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $500
Labor$100 – $300
Trailer module or sensor repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0860 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Check the trailer connection and companion codes first — the function depends on good data.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →