C0784: Trailer Brake Force Sensor Circuit Malfunction
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonTow gently with extra following distance until proportional trailer braking is restored.
Your trailer brakes still work, but they won't automatically match how hard you're braking the truck. You get a trailer brake warning.
Key facts
C0784 means trailer Brake Force Sensor Circuit Malfunction. Your trailer brakes still work, but they won't automatically match how hard you're braking the truck. You get a trailer brake warning. WrenchFair's published fair-price range for this repair is $150–$400 parts and $100–$250 labor at independent shops.
WrenchFair rates C0784 a 3-of-5 DIY difficulty (“The controller is in the dash — reachable, but verify the wiring before replacing it.”) with a “Diagnose soon” driveability rating: Tow gently with extra following distance until proportional trailer braking is restored. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
trailer brake warning
trailer brakes feel weak or grabby
no proportional trailer braking
Likely causes
trailer brake force sensor failed
wiring or connector fault
controller internal fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check the controller's connector and wiring. Tests: wiring or connector fault
2. Verify the controller has clean power and ground. Tests: controller internal fault
3. Test the force sensor circuit per the service procedure. Tests: trailer brake force sensor failed
4. Replace the controller if the sensor circuit tests bad. Tests: controller internal fault
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$150 – $400
Labor$100 – $250
Trailer brake controller replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0784 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — The controller is in the dash — reachable, but verify the wiring before replacing it.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →