C061B: ECM Request - Forced Traction Control Disable
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonTraction control is off and the engine has its own issue — get the engine fault diagnosed.
Your traction control light comes on, sometimes with a check-engine light. Traction control is deliberately switched off by the engine computer.
Key facts
C061B means eCM Request - Forced Traction Control Disable. Your traction control light comes on, sometimes with a check-engine light. Traction control is deliberately switched off by the engine computer. WrenchFair's published fair-price range for this repair is $0–$300 parts and $100–$250 labor at independent shops.
WrenchFair rates C061B a 2-of-5 DIY difficulty (“This code is a messenger — the real fault is whatever the engine computer is complaining about.”) with a “Diagnose soon” driveability rating: Traction control is off and the engine has its own issue — get the engine fault diagnosed. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
traction control light on
check engine light may also be on
reduced engine power possible
Likely causes
engine fault limiting torque control (fix engine codes first)
throttle body fault
engine sensor fault
software issue
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Read ENGINE codes first — C061B follows them. Tests: engine fault limiting torque control (fix engine codes first)
2. Repair the engine fault (throttle, sensor, misfire, whatever it is). Tests: engine sensor fault
3. Clear all codes and road-test.
4. If C061B persists with no engine codes, check for module software updates. Tests: engine fault limiting torque control (fix engine codes first)
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$0 – $300
Labor$100 – $250
Repair of the underlying engine fault. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C061B ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — This code is a messenger — the real fault is whatever the engine computer is complaining about.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →