Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBraking still works, but assist features may misbehave — get it diagnosed soon.
You might get a brake-system warning, and brake assist or hill hold can act up. The sensor was never taught its rest and fully-pressed positions; the brakes themselves still work when you press the pedal.
Key facts
C05C0 means brake Pedal Position Sensor A Not Learned. You might get a brake-system warning, and brake assist or hill hold can act up. The sensor was never taught its rest and fully-pressed positions; the brakes themselves still work when you press the pedal. WrenchFair's published fair-price range for this repair is $40–$180 parts and $75–$200 labor at independent shops.
WrenchFair rates C05C0 a 2-of-5 DIY difficulty (“Learning is a scan-tool procedure; replacement is usually a couple of bolts at the pedal.”) with a “Diagnose soon” driveability rating: Braking still works, but assist features may misbehave — get it diagnosed soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
brake system warning light on
brake assist behaves oddly
hill hold unavailable
Likely causes
sensor failed
sensor out of calibration
wiring or connector fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check the sensor's connector and wiring at the pedal assembly. Tests: wiring or connector fault
2. Watch the sensor's live reading while slowly pressing the pedal — it should move smoothly with no dropouts.
3. Run the pedal sensor learn/calibration procedure with a capable scan tool. Tests: sensor out of calibration
4. If it won't learn, replace the sensor and repeat the procedure.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $180
Labor$75 – $200
Pedal sensor learn or replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C05C0 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Learning is a scan-tool procedure; replacement is usually a couple of bolts at the pedal.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →