C051F: Multi-axis Acceleration Sensor Module A Correlation
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonStability assist is degraded — drive conservatively, especially in rain or snow.
Your stability and traction control warnings come on. This sensor's story doesn't match what the yaw and wheel-speed sensors are saying. The car drives normally, but the stability assists are degraded.
Key facts
C051F means multi-axis Acceleration Sensor Module A Correlation. Your stability and traction control warnings come on. This sensor's story doesn't match what the yaw and wheel-speed sensors are saying. The car drives normally, but the stability assists are degraded. WrenchFair's published fair-price range for this repair is $100–$350 parts and $80–$200 labor at independent shops.
WrenchFair rates C051F a 3-of-5 DIY difficulty (“The sensor is usually easy to reach; proving it's the culprit takes live-data comparison.”) with a “Diagnose soon” driveability rating: Stability assist is degraded — drive conservatively, especially in rain or snow. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
stability control warning light on
traction control light on
esc may intervene oddly or not at all
Likely causes
sensor reading incorrectly
sensor mounted in the wrong orientation
another stability sensor faulty, making this one look wrong
module fault (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
2. Check the sensor is firmly mounted in its original orientation. Tests: sensor mounted in the wrong orientation
3. Inspect its connector and wiring for corrosion or damage.
4. Compare its live readings against the other stability sensors while driving straight on level ground. Tests: sensor reading incorrectly
5. Replace the sensor if its output is erratic or frozen.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $350
Labor$80 – $200
Multi-axis acceleration sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C051F ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — The sensor is usually easy to reach; proving it's the culprit takes live-data comparison.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →