Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYour regular brakes keep working normally, but ABS, traction control, and stability control are probably disabled until this is fixed. Drive gently on wet or slippery roads.
The relay powering your ABS valves failed its self-check. Your normal brakes work fine, but ABS, traction control, and stability control are switched off.
Key facts
C0225 means aBS Valve Relay Circuit. The relay powering your ABS valves failed its self-check. Your normal brakes work fine, but ABS, traction control, and stability control are switched off. WrenchFair's published fair-price range for this repair is $15–$80 parts and $80–$200 labor at independent shops.
WrenchFair rates C0225 a 4-of-5 DIY difficulty (“A fuse-box relay swap is trivial; an integrated relay means module-level repair.”) with a “Diagnose soon” driveability rating: Your regular brakes keep working normally, but ABS, traction control, and stability control are probably disabled until this is fixed. Drive gently on wet or slippery roads. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
abs warning light on
traction control or stability control light on
cruise control stops working
Likely causes
valve relay failed (most common)
corroded relay socket
wiring fault in the relay control circuit
integrated relay inside the module - which means module repair
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Locate the ABS valve relay and check its fuse. Tests: valve relay failed (most common)
2. Swap it with an identical relay from a non-critical circuit and retest. Tests: wiring fault in the relay control circuit
3. Inspect the relay socket for corrosion. Tests: corroded relay socket
4. If the relay is integrated into the module on your car, the module needs repair or replacement. Tests: integrated relay inside the module - which means module repair
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$15 – $80
Labor$80 – $200
A relay replacement, often under $150 at a shop. Module repair for an integrated relay runs higher. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0225 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — A fuse-box relay swap is trivial; an integrated relay means module-level repair.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →