Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYour brakes work, but check your brake lights - a bad pedal signal can leave them stuck on or dark.
The sensor that tells your car how far you're pressing the brake pedal is sending a suspicious signal. Your brakes still work, but the assist systems may be confused about your braking.
Key facts
C0075 means brake Pedal Position Performance. The sensor that tells your car how far you're pressing the brake pedal is sending a suspicious signal. Your brakes still work, but the assist systems may be confused about your braking. WrenchFair's published fair-price range for this repair is $40–$150 parts and $80–$200 labor at independent shops.
WrenchFair rates C0075 a 4-of-5 DIY difficulty (“Sensor replacement is usually simple; adjustment takes patience.”) with a “Diagnose soon” driveability rating: Your brakes work, but check your brake lights - a bad pedal signal can leave them stuck on or dark. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
abs or traction control light on
brake lights may not work correctly
cruise control won't engage
Likely causes
brake pedal position sensor worn or failed
sensor misadjusted
wiring fault to the sensor
stop lamp switch also faulty - check it too
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Watch brake pedal position in scan tool live data while slowly pressing the pedal - it should rise smoothly. Tests: brake pedal position sensor worn or failed
2. Check that the brake lights work correctly.
3. Inspect the sensor mounting and adjustment at the pedal. Tests: brake pedal position sensor worn or failed
4. Check the wiring and connector for damage.
5. Replace the sensor if the signal is jumpy or dead.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $150
Labor$80 – $200
A brake pedal position sensor replacement, roughly $150-$300 installed. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0075 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Sensor replacement is usually simple; adjustment takes patience.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →