Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonTraction control may not work right while the modules disagree. Fix the engine-side fault first.
Your engine computer and traction control computer disagree about how much power the engine is making. Fix any engine codes first - this one is usually a side effect.
Key facts
C0073 means delivered Driving Torque. Your engine computer and traction control computer disagree about how much power the engine is making. Fix any engine codes first - this one is usually a side effect. WrenchFair's published fair-price range for this repair is $0–$200 parts and $100–$300 labor at independent shops.
WrenchFair rates C0073 a 4-of-5 DIY difficulty (“The real work is diagnosing the engine side; this code usually clears once that's fixed.”) with a “Diagnose soon” driveability rating: Traction control may not work right while the modules disagree. Fix the engine-side fault first. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
traction control light on
engine warning light may also be on
reduced engine power in some cases
Likely causes
an underlying engine fault - fix engine codes first (most common)
communication issue between the engine and traction control modules
wiring or CAN bus fault
module software needing an update
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Scan the engine module first and fix any engine codes - this code is usually a follower, not the leader. Tests: an underlying engine fault - fix engine codes first (most common)
2. Look for CAN communication codes between modules. Tests: communication issue between the engine and traction control modules
3. Check module powers and grounds if communication codes are present. Tests: communication issue between the engine and traction control modules
4. Only after the engine side is clean should this code be chased on its own. Tests: an underlying engine fault - fix engine codes first (most common)
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$0 – $200
Labor$100 – $300
Usually resolved by fixing the underlying engine fault. Standalone diagnosis runs $100-$300 at a shop. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0073 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — The real work is diagnosing the engine side; this code usually clears once that's fixed.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →