C004C

C004C: Brake Booster Motor A Position Sensor Exceeded Learning Limit

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your car's electric brake booster lost track of where its motor is, usually because it was replaced or disturbed without being calibrated afterward. Brake boost may be reduced, so the pedal can feel harder.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. 1. Check whether the booster or module was recently replaced - a missed calibration is the most common cause. Tests: booster calibration not performed after booster or module replacement (most common)
  2. 2. Run the brake booster calibration/learn procedure with a capable scan tool. Tests: booster calibration not performed after booster or module replacement (most common)
  3. 3. If it won't complete the learn, inspect the position sensor wiring and connector. Tests: wiring fault to the position sensor
  4. 4. Check for technical service bulletins for this code on your vehicle.
  5. 5. If the sensor won't learn, the booster assembly needs replacement.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$100 – $500
Labor$100 – $300

A brake booster calibration or position sensor repair, roughly $200-$600. Full electric booster replacement runs higher. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C004C ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — The calibration needs a scan tool with the booster learn routine; the sensor itself is part of the booster assembly.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →