C004C: Brake Booster Motor A Position Sensor Exceeded Learning Limit
DIY difficulty 4/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBrake boost may be reduced, making the pedal harder and stopping distances longer. Your base brakes still work, but get this checked soon.
Your car's electric brake booster lost track of where its motor is, usually because it was replaced or disturbed without being calibrated afterward. Brake boost may be reduced, so the pedal can feel harder.
Key facts
C004C means brake Booster Motor A Position Sensor Exceeded Learning Limit. Your car's electric brake booster lost track of where its motor is, usually because it was replaced or disturbed without being calibrated afterward. Brake boost may be reduced, so the pedal can feel harder. WrenchFair's published fair-price range for this repair is $100–$500 parts and $100–$300 labor at independent shops.
WrenchFair rates C004C a 4-of-5 DIY difficulty (“The calibration needs a scan tool with the booster learn routine; the sensor itself is part of the booster assembly.”) with a “Diagnose soon” driveability rating: Brake boost may be reduced, making the pedal harder and stopping distances longer. Your base brakes still work, but get this checked soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
brake system warning light on
brake pedal feels harder than normal
abs or stability control light on
Likely causes
booster calibration not performed after booster or module replacement (most common)
booster motor position sensor failed
wiring fault to the position sensor
electric brake booster motor mechanical issue
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check whether the booster or module was recently replaced - a missed calibration is the most common cause. Tests: booster calibration not performed after booster or module replacement (most common)
2. Run the brake booster calibration/learn procedure with a capable scan tool. Tests: booster calibration not performed after booster or module replacement (most common)
3. If it won't complete the learn, inspect the position sensor wiring and connector. Tests: wiring fault to the position sensor
4. Check for technical service bulletins for this code on your vehicle.
5. If the sensor won't learn, the booster assembly needs replacement.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $500
Labor$100 – $300
A brake booster calibration or position sensor repair, roughly $200-$600. Full electric booster replacement runs higher. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C004C ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — The calibration needs a scan tool with the booster learn routine; the sensor itself is part of the booster assembly.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →