Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeOnly the reminder lamp is affected - the seatbelt itself still protects you normally.
The little dashboard light that reminds you to buckle the driver's seatbelt has an electrical problem - it may not light up at all. Your seatbelt still works perfectly and protects you normally; you just lose the reminder.
Key facts
B00D0 means driver seat belt indicator circuit fault. The little dashboard light that reminds you to buckle the driver's seatbelt has an electrical problem - it may not light up at all. Your seatbelt still works perfectly and protects you normally; you just lose the reminder. WrenchFair's published fair-price range for this repair is $30–$120 parts and $80–$200 labor at independent shops.
WrenchFair rates B00D0 a 2-of-5 DIY difficulty (“No SRS handling needed for a lamp circuit; the fix is usually a bulb/LED or cluster work.”) with a “Drive safe” driveability rating: Only the reminder lamp is affected - the seatbelt itself still protects you normally. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
seat belt reminder light not working
seat belt reminder chime may also be affected
Likely causes
Burned-out reminder lamp or failed LED in the instrument cluster (most common)
Damaged wiring or corroded connector to the cluster
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Confirm the symptom: with the ignition on and the belt unbuckled, check whether the reminder lamp lights and the chime sounds. Tests: Burned-out reminder lamp or failed LED in the instrument cluster (most common)
Inspect the cluster connectors and related wiring for looseness or corrosion. Tests: Damaged wiring or corroded connector to the cluster
Test the lamp/LED circuit per the factory service manual; many clusters need professional repair or replacement if the lamp driver failed. Tests: Burned-out reminder lamp or failed LED in the instrument cluster (most common)
Clear the code and retest.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$30 – $120
Labor$80 – $200
Reminder lamp/bulb replacement or instrument cluster repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for B00D0 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — No SRS handling needed for a lamp circuit; the fix is usually a bulb/LED or cluster work.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →