B00D4: Restraint system malfunction audible indicator circuit fault
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeOnly the warning sound is affected - belts and airbags still work normally.
The warning chime that sounds for seat-belt and airbag alerts has an electrical problem - it may stay silent when it should sound. Your belts and airbags still work normally; you just lose the audible reminder.
Key facts
B00D4 means restraint system malfunction audible indicator circuit fault. The warning chime that sounds for seat-belt and airbag alerts has an electrical problem - it may stay silent when it should sound. Your belts and airbags still work normally; you just lose the audible reminder. WrenchFair's published fair-price range for this repair is $30–$100 parts and $80–$200 labor at independent shops.
WrenchFair rates B00D4 a 2-of-5 DIY difficulty (“No SRS handling needed for a chime circuit; the fix is usually the sounder or cluster.”) with a “Drive safe” driveability rating: Only the warning sound is affected - belts and airbags still work normally. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
warning chime not sounding
seat belt reminder silent
Likely causes
Failed chime sounder or cluster speaker (most common)
Damaged wiring or corroded connector to the cluster/sounder
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Confirm the symptom: with the ignition on and a belt unbuckled, check whether the chime sounds.
Inspect the cluster/sounder connectors and wiring for looseness or corrosion. Tests: Damaged wiring or corroded connector to the cluster/sounder
Test the chime circuit per the factory service manual; a dead sounder usually means cluster repair or replacement. Tests: Failed chime sounder or cluster speaker (most common)
Clear the code and retest.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$30 – $100
Labor$80 – $200
Chime sounder or instrument cluster repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for B00D4 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — No SRS handling needed for a chime circuit; the fix is usually the sounder or cluster.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →