Uneven tire wear — reading the wear pattern like a diagnosis

The tires are wearing, but not evenly — inside edges gone while the outside looks new, or the centers bald with good shoulders, or patchy scallops around the tread. Tires are honest witnesses: each wear pattern maps to a specific cause, and new tires on an uncorrected problem just get destroyed the same way. Read the pattern first, buy tires after.

Most likely causes, in check-order

Cheapest and easiest first. Don't buy parts until the checks below point at one.

1. Wear on the inner or outer edge — alignment

One-sided edge wear is a toe or camber problem: the tire is being dragged or leaned instead of rolling flat. Inner-edge wear is the classic sign of too much toe-out or negative camber. An alignment is the fix — but only after worn steering and suspension parts are replaced, since play moves the settings around.

2. Wear in the center — overinflation

The center of the tread wearing faster than the shoulders means the tire is bulging from too much pressure. Check against the door-jamb sticker, not the tire's maximum.

3. Wear on both shoulders — underinflation

Both edges wearing with a good center means the tire is running soft and riding on its shoulders. Underinflation also costs fuel and heats the tire — it's the wear pattern that's also a safety note.

4. Cupping or scalloping — worn shocks or balance

Patchy dips around the tread mean the wheel is bouncing instead of rolling steadily: worn shocks/struts or a badly out-of-balance wheel. See the bouncy ride guide.

5. Feathering — toe wear you can feel

Run your hand across the tread: tread blocks that feel sharp one way and smooth the other are feathered — a toe alignment problem, often with a humming noise that gets mistaken for a wheel bearing.

Driveway checks

Related