Every speed bump, driveway apron, and parking-lot dip gets narrated by your suspension in squeaks. It's loudest in the morning or in cold weather and often quiets down after the car warms up — which is the whole diagnosis in one observation: rubber hardens when cold and softens with heat, so a cold-loud, warm-quiet squeak is dried-out rubber bushings almost every time.
Cheapest and easiest first. Don't buy parts until the checks below point at one.
The main characters. Control-arm bushings are big rubber isolators that flex with every bump; when the rubber dries and hardens, every flex squeaks. Cold-loud, warm-quiet is their signature.
The sway bar twists in its bushings on every bump. Dry sway-bar bushings squeak on slow articulation — speed bumps are their stage. End links with worn ball joints add a rattle underneath the squeak.
The exception to 'usually harmless': dry ball joints squeak too, but they're steering/suspension pivots where wear matters. Squeak plus clunking, or any play in the wheel tests, moves this from annoyance to priority.
Upper strut mounts can squeak on bump articulation as well as on steering (see the creaking-when-turning guide). Bump-only squeak points at bushings; bump-plus-turning squeak points at the mounts.