Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonA dead fan lets the module cook itself - fix it before heat kills an expensive computer.
A small fan that cools one of your car's computer modules isn't running. If the module overheats it can shut itself down or fail - and the fan is cheap compared to the computer it protects.
Key facts
U350C means control Module Cooling Fan Circuit/Open. A small fan that cools one of your car's computer modules isn't running. If the module overheats it can shut itself down or fail - and the fan is cheap compared to the computer it protects. WrenchFair's published fair-price range for this repair is $90–$690 parts and $75–$500 labor at independent shops.
WrenchFair rates U350C a 3-of-5 DIY difficulty (“The fan is usually easy to reach once you find the module, but some modules live in awkward spots behind trim or under seats.”) with a “Diagnose soon” driveability rating: A dead fan lets the module cook itself - fix it before heat kills an expensive computer. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
module overheating warnings
module shutting down when hot
fan never running or running constantly
blown fan fuse
reduced module performance in hot weather
Likely causes
Failed fan motor with an open winding (most common)
Blown fuse or failed fan relay
Broken wire in the fan circuit
Debris jammed in the fan
Module fan driver fault (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Locate the module and its cooling fan, and check whether the fan runs when commanded.
Test the fan directly with power and ground to see if the motor itself is dead.
Check the fan fuse, relay, and wiring for opens or shorts. Tests: Blown fuse or failed fan relay
Clear any debris from the fan and its intake.
Replace the fan if the motor is weak or dead, then confirm the module commands it correctly through its speed range.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$90 – $690
Labor$75 – $500
Module cooling fan replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U350C ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — The fan is usually easy to reach once you find the module, but some modules live in awkward spots behind trim or under seats.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →