U3014

U3014: Control Module Input Power D Circuit/Open

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

One of the wires powering your car's computer module is delivering no power - usually a blown fuse, a broken wire, or a bad connection. The affected module may stop working until its power comes back.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read all codes and identify which module reported this one - the fix follows the module, not the code.
  2. Check the battery and charging system first - a dead or weak battery causes widespread module-power complaints. Tests: Blown or missing fuse on the module's power feed (most common - always check fuses first)
  3. Find the fuse feeding the module's input power D circuit and test it with a meter or test light, not just your eyes. Tests: Blown or missing fuse on the module's power feed (most common - always check fuses first)
  4. Inspect the module's connectors for loose pins, pushed-back terminals, or green corrosion. Tests: Corroded, loose, or pushed-back pin in the module's power connector
  5. Using a wiring diagram, check continuity on the input power D feed from the fuse to the module connector.
  6. Repair the feed, clear the code, and confirm the module responds and the code does not return.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$10 – $340
Labor$50 – $350

Blown fuse or wiring/connector repair on the module power feed. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U3014 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Finding the right fuse and module connector is the hard part; the actual fix is usually a fuse, a pin, or a short length of wire.

Watch this repair on YouTube

Parts & tools

Electrical diagnosis toolkit — what the job actually takes

Torque specs: Module connectors: hand-tight until they click — never force them.

Pro tip: Check powers AND grounds before condemning a module — most “module failures” are wiring. Disconnect the battery before unplugging modules.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →