Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBad combustion data means misfires may go undetected — fix it soon to protect the catalytic converter.
The combustion-watching module is responding, but its readings don't make sense. The computer ignores the bad data and uses backup misfire detection. Start with the spark plugs — they're the usual culprit.
Key facts
U0901 means invalid data from ion sense module. The combustion-watching module is responding, but its readings don't make sense. The computer ignores the bad data and uses backup misfire detection. Start with the spark plugs — they're the usual culprit. WrenchFair's published fair-price range for this repair is $100–$400 parts and $100–$250 labor at independent shops.
WrenchFair rates U0901 a 3-of-5 DIY difficulty (“Wrong or worn plugs are the classic cause — verify the exact plug spec for your engine.”) with a “Diagnose soon” driveability rating: Bad combustion data means misfires may go undetected — fix it soon to protect the catalytic converter. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
rough running
misfire codes
hesitation
Likely causes
worn or wrong spark plugs
failing ion sense module
electrical interference
corroded connector
software mismatch after module replacement
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check that the installed plugs match the exact OEM spec — wrong plugs corrupt ion readings. Tests: worn or wrong spark plugs
Replace worn plugs and clear the code. Tests: worn or wrong spark plugs
Inspect the module connector and wiring for damage. Tests: corroded connector
If the code returns with correct new plugs, replace the ion sense module. Tests: failing ion sense module
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $400
Labor$100 – $250
Replacing spark plugs and the ion sense module. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0901 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Wrong or worn plugs are the classic cause — verify the exact plug spec for your engine.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →