U0696

U0696: Lost communication with particulate filter pressure sensor C

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your diesel has a sensor that watches how full the exhaust filter is. The car's computer can't talk to it anymore. Without that reading, the car can't clean the filter when it needs to, so the filter can clog up.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Find DPF pressure sensor C — typically on the firewall or inner fender with two thin hoses running down to the particulate filter. Tests: failed DPF pressure sensor
  2. Inspect the electrical connector for corrosion and the two hoses for cracks, kinks, or soot blockage; reseat or replace damaged hoses. Tests: cracked or soot-clogged sensing hoses
  3. With a scan tool, look at the sensor's live pressure reading at idle and under load — a frozen or missing reading points to the sensor. Tests: failed DPF pressure sensor
  4. Clear the code, take a drive with some steady highway speed, and see if it returns.
  5. If the wiring and hoses are sound, replace the sensor and clear the code; run a forced regeneration if your scan tool supports it.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$80 – $250
Labor$100 – $200

Replacing the DPF differential pressure sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0696 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — The sensor is usually bolted to the firewall with two small hoses — a straightforward swap once you find it.

Watch this repair on YouTube

Parts & tools

Electrical diagnosis toolkit — what the job actually takes

Torque specs: Module connectors: hand-tight until they click — never force them.

Pro tip: Check powers AND grounds before condemning a module — most “module failures” are wiring. Disconnect the battery before unplugging modules.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →