U068C: Lost communication with turbocharger/supercharger inlet pressure sensor B
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBoost control is working with partial data — drive gently until it's fixed.
A sensor measures air pressure right where it enters the turbo. It went quiet, so the computer is missing part of its boost picture. Expect a check engine light and softer turbo response.
Key facts
U068C means lost communication with turbocharger/supercharger inlet pressure sensor B. A sensor measures air pressure right where it enters the turbo. It went quiet, so the computer is missing part of its boost picture. Expect a check engine light and softer turbo response. WrenchFair's published fair-price range for this repair is $50–$150 parts and $80–$160 labor at independent shops.
WrenchFair rates U068C a 2-of-5 DIY difficulty (“Mounted on the intake plumbing before the turbo — check the air filter and clamps while you're there.”) with a “Diagnose soon” driveability rating: Boost control is working with partial data — drive gently until it's fixed. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
reduced turbo response
limp mode
whistling intake noise
Likely causes
failed inlet pressure sensor
loose or cracked intake plumbing
oil-contaminated connector
damaged wiring
clogged air filter confusing the system
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Locate the inlet pressure sensor on the intake pipe before the turbo and check its connector. Tests: failed inlet pressure sensor
Inspect intake plumbing for cracks or loose clamps and check the air filter. Tests: loose or cracked intake plumbing
Watch the inlet pressure reading on a scan tool — it should move with engine speed. Tests: failed inlet pressure sensor
Replace the sensor if the plumbing and wiring are sound; clear and retest. Tests: loose or cracked intake plumbing
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$50 – $150
Labor$80 – $160
Replacing the turbo inlet pressure sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U068C ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Mounted on the intake plumbing before the turbo — check the air filter and clamps while you're there.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →