U0675: Lost communication with turbocharger/supercharger speed sensor A
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonTurbo overspeed protection is offline — the computer is capping boost, so don't push the car hard.
There's a sensor measuring how fast your turbo is spinning so it doesn't spin itself apart. It went silent, so the computer limits boost to stay safe. Expect noticeably less power.
Key facts
U0675 means lost communication with turbocharger/supercharger speed sensor A. There's a sensor measuring how fast your turbo is spinning so it doesn't spin itself apart. It went silent, so the computer limits boost to stay safe. Expect noticeably less power. WrenchFair's published fair-price range for this repair is $100–$300 parts and $150–$300 labor at independent shops.
WrenchFair rates U0675 a 3-of-5 DIY difficulty (“The sensor threads into the turbo housing — tight access and a hot neighborhood, so let it cool first.”) with a “Diagnose soon” driveability rating: Turbo overspeed protection is offline — the computer is capping boost, so don't push the car hard. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
greatly reduced power
limp mode
turbo lag
Likely causes
failed turbo speed sensor
damaged sensor wiring in the turbo housing
oil contamination
corroded connector
engine computer communication fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Locate the speed sensor on the turbo compressor housing and inspect its connector. Tests: damaged sensor wiring in the turbo housing
Check for oil leaks around the turbo that could foul the sensor. Tests: failed turbo speed sensor
Watch turbo speed on a scan tool while revving — no reading means sensor or wiring. Tests: failed turbo speed sensor
Replace the sensor if wiring is sound; clear and verify boost returns. Tests: damaged sensor wiring in the turbo housing
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $300
Labor$150 – $300
Replacing the turbo speed sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0675 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — The sensor threads into the turbo housing — tight access and a hot neighborhood, so let it cool first.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →