Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonEmissions control is degraded — drivable, but fix it before your emissions test.
Your engine recycles some exhaust gas to cut pollution, and a sensor in that system stopped talking to the computer. Expect a check engine light — the car usually still drives fine, but it won't pass an emissions test like this.
Key facts
U0652 means lost communication with EGR sensor B. Your engine recycles some exhaust gas to cut pollution, and a sensor in that system stopped talking to the computer. Expect a check engine light — the car usually still drives fine, but it won't pass an emissions test like this. WrenchFair's published fair-price range for this repair is $60–$200 parts and $100–$200 labor at independent shops.
WrenchFair rates U0652 a 2-of-5 DIY difficulty (“Often accessible on the EGR valve — clean soot from the passages while you're in there.”) with a “Diagnose soon” driveability rating: Emissions control is degraded — drivable, but fix it before your emissions test. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
failed emissions test
rough idle
reduced fuel economy
pinging under load
Likely causes
failed EGR sensor
soot-fouled sensor
corroded connector
damaged wiring near hot EGR parts
clogged EGR passages
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Locate EGR sensor B on the EGR valve or plumbing and inspect its connector. Tests: corroded connector
Check EGR passages for heavy carbon — clean what you can reach. Tests: clogged EGR passages
Watch the sensor's reading on a scan tool during EGR operation.
Replace the sensor if wiring and passages are sound; clear and retest. Tests: clogged EGR passages
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $200
Labor$100 – $200
Replacing the EGR sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0652 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Often accessible on the EGR valve — clean soot from the passages while you're in there.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →