U064E: Lost communication with EGR cooler bypass position sensor bank 1
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDrivable — but a stuck bypass valve can overheat EGR components, so don't ignore it indefinitely.
There's a valve that decides whether recycled exhaust gas goes through a cooler first, and its position sensor went quiet. The computer can't confirm the valve's position. Usually just a check engine light.
Key facts
U064E means lost communication with EGR cooler bypass position sensor bank 1. There's a valve that decides whether recycled exhaust gas goes through a cooler first, and its position sensor went quiet. The computer can't confirm the valve's position. Usually just a check engine light. WrenchFair's published fair-price range for this repair is $80–$250 parts and $150–$300 labor at independent shops.
WrenchFair rates U064E a 3-of-5 DIY difficulty (“Buried in the EGR plumbing — check that the valve itself moves freely before condemning the sensor.”) with a “Diagnose soon” driveability rating: Drivable — but a stuck bypass valve can overheat EGR components, so don't ignore it indefinitely. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
failed emissions test
reduced fuel economy
no noticeable symptoms
Likely causes
failed bypass position sensor
carbon-seized bypass valve
damaged wiring
corroded connector
engine computer communication fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Find the EGR cooler bypass valve on bank 1 and inspect the sensor connector. Tests: failed bypass position sensor
Check that the valve moves freely — carbon seizes these. Tests: carbon-seized bypass valve
Watch the position reading on a scan tool while commanding the valve. Tests: failed bypass position sensor
Free up, repair, or replace as needed; clear and retest.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $250
Labor$150 – $300
Replacing the EGR cooler bypass valve position sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U064E ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Buried in the EGR plumbing — check that the valve itself moves freely before condemning the sensor.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →