U0641: Lost communication with EVAP system pressure sensor/switch circuit A
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonEmissions leak detection is down — safe to drive, but fix it before your emissions test.
Your car regularly pressure-tests its fuel system for vapor leaks, and this sensor is how it does it. The sensor went quiet, so the car can't run the test. Expect a check engine light — the car drives fine.
Key facts
U0641 means lost communication with EVAP system pressure sensor/switch circuit A. Your car regularly pressure-tests its fuel system for vapor leaks, and this sensor is how it does it. The sensor went quiet, so the car can't run the test. Expect a check engine light — the car drives fine. WrenchFair's published fair-price range for this repair is $50–$150 parts and $80–$180 labor at independent shops.
WrenchFair rates U0641 a 2-of-5 DIY difficulty (“Check the gas cap and EVAP hoses first — they're the usual suspects and cost almost nothing.”) with a “Diagnose soon” driveability rating: Emissions leak detection is down — safe to drive, but fix it before your emissions test. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
failed emissions test
fuel smell
no noticeable symptoms
Likely causes
failed EVAP pressure sensor
cracked EVAP hoses
loose gas cap causing follow-on codes
corroded connector
damaged wiring
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check the gas cap — tighten or replace it, then clear the code and drive.
Locate EVAP pressure sensor A near the tank and inspect its connector. Tests: failed EVAP pressure sensor
Inspect EVAP hoses and the canister for cracks. Tests: cracked EVAP hoses
Watch the pressure reading during an EVAP self-test on a scan tool. Tests: failed EVAP pressure sensor
Replace the sensor if wiring and hoses are sound; clear and retest.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$50 – $150
Labor$80 – $180
Replacing the EVAP system pressure sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0641 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Check the gas cap and EVAP hoses first — they're the usual suspects and cost almost nothing.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →