Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonCooling capacity is reduced — fine on the highway, but watch the gauge in traffic and stop if it overheats.
Your radiator fan stopped talking to the computer, so it can't be turned on when needed. In traffic or hot weather the engine can overheat. Watch the temperature gauge and turn the heater on full blast if it starts climbing — that buys you time.
Key facts
U0633 means lost communication with fan 2. Your radiator fan stopped talking to the computer, so it can't be turned on when needed. In traffic or hot weather the engine can overheat. Watch the temperature gauge and turn the heater on full blast if it starts climbing — that buys you time. WrenchFair's published fair-price range for this repair is $150–$400 parts and $150–$350 labor at independent shops.
WrenchFair rates U0633 a 3-of-5 DIY difficulty (“Check fuses and relays first — then confirm the fan spins freely by hand before replacing it.”) with a “Diagnose soon” driveability rating: Cooling capacity is reduced — fine on the highway, but watch the gauge in traffic and stop if it overheats. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
overheating in traffic
temperature gauge climbing at idle
A/C blowing warm at idle
Likely causes
failed fan motor or control module
blown fan fuse or relay
corroded connector
damaged wiring
seized fan blade
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check the fan fuse and relay before anything else. Tests: blown fan fuse or relay
With the engine off, spin the fan by hand — it should turn freely.
Locate fan 2's connector, inspect for corrosion, and command the fan on with a scan tool. Tests: corroded connector
Verify power and ground at the connector with a test light. Tests: corroded connector
Replace the fan assembly if power is present but it won't run; verify operation at idle.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$150 – $400
Labor$150 – $350
Replacing the electric cooling fan assembly. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0633 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Check fuses and relays first — then confirm the fan spins freely by hand before replacing it.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →