U061E: Lost communication with battery isolation/voltage stabilization control module
DIY difficulty 4/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonPower management and battery isolation are degraded — get it diagnosed soon, especially if 12V gremlins appear.
There's a module keeping your car's 12V power steady and able to disconnect the big battery in an emergency. The computer can't talk to it. You might see electrical warnings, and high-voltage safety functions may be degraded.
Key facts
U061E means lost communication with battery isolation/voltage stabilization control module. There's a module keeping your car's 12V power steady and able to disconnect the big battery in an emergency. The computer can't talk to it. You might see electrical warnings, and high-voltage safety functions may be degraded. WrenchFair's published fair-price range for this repair is $200–$600 parts and $150–$400 labor at independent shops.
WrenchFair rates U061E a 4-of-5 DIY difficulty (“High-voltage safety is involved — diagnose carefully and let a specialist handle pack-side work.”) with a “Diagnose soon” driveability rating: Power management and battery isolation are degraded — get it diagnosed soon, especially if 12V gremlins appear. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
electrical system warnings
hybrid/EV warning light
12V battery draining
accessories acting up
Likely causes
failed isolation/stabilization module
blown module fuse
corroded connector
low 12V battery
damaged wiring
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Test the 12V battery and charging system — a weak 12V battery causes ghost communication codes. Tests: low 12V battery
Check the module's fuses and inspect its connector. Tests: corroded connector
Verify power and ground at the module.
If power is good and it still won't communicate, have a specialist replace and program the module.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$200 – $600
Labor$150 – $400
Replacing the battery isolation/voltage stabilization module. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U061E ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — High-voltage safety is involved — diagnose carefully and let a specialist handle pack-side work.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →