U0614: Lost communication with intake air temperature sensor 2 bank 2
DIY difficulty 1/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThis only trims fueling slightly — safe to drive, but fix it so the engine runs at its best.
A small sensor measures how hot the air entering your engine is, and the computer uses that to mix fuel correctly. It stopped responding. You'll likely just see a check engine light, maybe slightly worse mileage.
Key facts
U0614 means lost communication with intake air temperature sensor 2 bank 2. A small sensor measures how hot the air entering your engine is, and the computer uses that to mix fuel correctly. It stopped responding. You'll likely just see a check engine light, maybe slightly worse mileage. WrenchFair's published fair-price range for this repair is $20–$80 parts and $60–$120 labor at independent shops.
WrenchFair rates U0614 a 1-of-5 DIY difficulty (“Usually threads into the intake or charge pipe — unscrew, swap, done.”) with a “Diagnose soon” driveability rating: This only trims fueling slightly — safe to drive, but fix it so the engine runs at its best. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
slightly worse fuel economy
occasional hesitation
no noticeable symptoms
Likely causes
failed intake air temperature sensor
loose or corroded connector
damaged wiring near hot intake parts
sensor contaminated with oil
engine computer communication fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Locate intake air temperature sensor 2 on bank 2's intake tract and check its connector. Tests: failed intake air temperature sensor
Compare its temperature reading to ambient on a cold engine — way off means a bad sensor. Tests: failed intake air temperature sensor
Clear the code and drive; if it returns, replace the sensor.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $80
Labor$60 – $120
Replacing the intake air temperature sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U0614 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
1 of 5 — Usually threads into the intake or charge pipe — unscrew, swap, done.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →