U060F: Lost communication with mass or volume air flow sensor A
DIY difficulty 1/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe engine is guessing airflow — it's drivable but fix it soon to protect fuel economy and the catalytic converter.
The sensor that measures the air going into your engine stopped talking to the computer. The car guesses the airflow instead, which usually means rough running, a check engine light, and worse gas mileage.
Key facts
U060F means lost communication with mass or volume air flow sensor A. The sensor that measures the air going into your engine stopped talking to the computer. The car guesses the airflow instead, which usually means rough running, a check engine light, and worse gas mileage. WrenchFair's published fair-price range for this repair is $80–$250 parts and $60–$120 labor at independent shops.
WrenchFair rates U060F a 1-of-5 DIY difficulty (“Two screws and a connector in the intake tube — one of the easiest sensors to replace.”) with a “Diagnose soon” driveability rating: The engine is guessing airflow — it's drivable but fix it soon to protect fuel economy and the catalytic converter. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
rough idle
hesitation or stumbling
poor fuel economy
stalling
Likely causes
failed MAF sensor
contaminated sensing element
loose or corroded connector
air intake leak downstream of the sensor
damaged wiring
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Find the MAF sensor in the intake tube between the air filter and throttle body; check the connector. Tests: air intake leak downstream of the sensor
Inspect the intake tube for cracks or loose clamps — unmetered air causes the same symptoms.
Try cleaning the sensing element with dedicated MAF cleaner (never touch it) and clear the code. Tests: contaminated sensing element
Watch airflow readings on a scan tool at idle and 2500 rpm; no change means the sensor is dead.
Replace the sensor if cleaning doesn't restore the reading.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $250
Labor$60 – $120
Replacing the mass airflow sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U060F ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
1 of 5 — Two screws and a connector in the intake tube — one of the easiest sensors to replace.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →