U060E: Lost communication with crankcase pressure sensor
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonLost crankcase monitoring can hide pressure buildup that pushes oil past seals — check your oil level and fix it soon.
There's a sensor watching pressure inside your engine's crankcase to make sure fumes are being vented properly. It went silent. You might see a check engine light, and the car can't warn you about bigger problems hiding behind it.
Key facts
U060E means lost communication with crankcase pressure sensor. There's a sensor watching pressure inside your engine's crankcase to make sure fumes are being vented properly. It went silent. You might see a check engine light, and the car can't warn you about bigger problems hiding behind it. WrenchFair's published fair-price range for this repair is $40–$150 parts and $80–$160 labor at independent shops.
WrenchFair rates U060E a 2-of-5 DIY difficulty (“Usually mounted on the valve cover or PCV hose — check the whole PCV path for clogs while you're in there.”) with a “Diagnose soon” driveability rating: Lost crankcase monitoring can hide pressure buildup that pushes oil past seals — check your oil level and fix it soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
oil leaks from seals
whistling from the engine
rough idle
oil consumption
Likely causes
failed crankcase pressure sensor
clogged PCV hose or separator
oil-contaminated connector
damaged wiring
excessive blow-by overwhelming the sensor
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Find the crankcase pressure sensor on the valve cover or PCV plumbing and inspect its connector for oil. Tests: failed crankcase pressure sensor
Check PCV hoses for clogs, collapse, or oil sludge — a blocked PCV system can kill the sensor.
Watch the sensor's pressure reading on a scan tool at idle; no data means sensor or wiring. Tests: failed crankcase pressure sensor
If the PCV path is clear and wiring is good, replace the sensor.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $150
Labor$80 – $160
Replacing the crankcase pressure sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U060E ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Usually mounted on the valve cover or PCV hose — check the whole PCV path for clogs while you're in there.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →