U060B

U060B: Lost communication with turbocharger/supercharger boost sensor A

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your turbo (or supercharger) has a sensor that measures how much extra air it's pushing in. The computer can't talk to it, so it can't control boost properly. Expect a check engine light, less power, and the car may limit boost to stay safe.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Find boost sensor A on the charge piping and check the connector for oil contamination or looseness. Tests: failed boost pressure sensor
  2. Inspect the boost hoses and intercooler piping for splits or loose clamps — a boost leak can set companion codes. Tests: cracked boost piping confusing the system
  3. Watch boost pressure on a scan tool while driving; a missing or flat reading points to the sensor. Tests: failed boost pressure sensor
  4. Trace the sensor wiring away from the hot turbo for melted insulation. Tests: damaged wiring near the hot turbo
  5. Replace the sensor if wiring is good, clear the code, and confirm boost readings rise with throttle.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$60 – $180
Labor$80 – $160

Replacing the boost pressure sensor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for U060B ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Usually one bolt and a connector on the intake pipe — an easy swap once the engine is cool.

Watch this repair on YouTube

Parts & tools

Electrical diagnosis toolkit — what the job actually takes

Torque specs: Module connectors: hand-tight until they click — never force them.

Pro tip: Check powers AND grounds before condemning a module — most “module failures” are wiring. Disconnect the battery before unplugging modules.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →