P2E38

P2E38: Battery Charger B Enable Circuit Range/Performance

DIY difficulty 5/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your car's onboard charger - the box that turns wall power into battery power - is reporting a circuit range/performance fault. Charging may be slow, limited, or dead.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 7 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. High-voltage safety first: this code lives in the high-voltage system, which can carry lethal voltage. Only touch it if you are trained and equipped for HV service (insulated tools, HV gloves, service-plug procedure); everyone else should stop at scanning and hand the repair to a qualified EV/hybrid technician. Tests: High-voltage interlock loop open
  2. Scan the charging system and record input voltage, output voltage/current, temperatures, and interlock status. Tests: High-voltage interlock loop open
  3. Try a different charger and cable to rule out the wall side before blaming the car. Tests: Failed charger module or internal power supply (most common)
  4. Check the 12V system - chargers need healthy 12V to run their control electronics. Tests: Failed charger module or internal power supply (most common)
  5. Inspect the charge port, coupler lock mechanism, and related connectors for damage or debris.
  6. Check charger cooling (coolant level, pump operation) - overheating chargers derate or shut down.
  7. Charger module replacement is high-voltage work for a qualified technician.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$500 – $2500
Labor$300 – $700

Onboard charger module replacement by a qualified technician. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2E38 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

5 of 5 — Ruling out the cable and wall side is easy; everything inside the charger is HV professional work.

Watch this repair on YouTube

Parts & tools

Battery & charging toolkit — what the job actually takes

Torque specs: Terminal clamps: snug, typically 5–8 Nm. Over-tightening cracks the battery post.

Pro tip: Disconnect negative first, reconnect negative last. On module-heavy cars use a memory saver so you don’t lose radio codes and adaptations.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →