Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYou may be unable to charge - confirm you have enough range to reach a qualified shop or a working charger.
Your car's onboard charger - the box that turns wall power into battery power - is reporting an open circuit. Charging may be slow, limited, or dead.
Key facts
P2E35 means battery Charger B Enable Circuit/Open. Your car's onboard charger - the box that turns wall power into battery power - is reporting an open circuit. Charging may be slow, limited, or dead. WrenchFair's published fair-price range for this repair is $500–$2500 parts and $300–$700 labor at independent shops.
WrenchFair rates P2E35 a 5-of-5 DIY difficulty (“Ruling out the cable and wall side is easy; everything inside the charger is HV professional work.”) with a “Diagnose soon” driveability rating: You may be unable to charge - confirm you have enough range to reach a qualified shop or a working charger. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
car will not charge or charging stops early
charging much slower than normal
charger or ev system warning on the dash
charge port lock not engaging
charge status indicator shows fault
charging may not start or interrupts
Likely causes
Failed charger module or internal power supply (most common)
Overheating charger - cooling fault or blocked airflow
Input supply or enable circuit fault
High-voltage interlock loop open
Damaged charge port, coupler lock, or cable
open in enable wire
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 7 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
High-voltage safety first: this code lives in the high-voltage system, which can carry lethal voltage. Only touch it if you are trained and equipped for HV service (insulated tools, HV gloves, service-plug procedure); everyone else should stop at scanning and hand the repair to a qualified EV/hybrid technician. Tests: High-voltage interlock loop open
Scan the charging system and record input voltage, output voltage/current, temperatures, and interlock status. Tests: High-voltage interlock loop open
Try a different charger and cable to rule out the wall side before blaming the car. Tests: Failed charger module or internal power supply (most common)
Check the 12V system - chargers need healthy 12V to run their control electronics. Tests: Failed charger module or internal power supply (most common)
Inspect the charge port, coupler lock mechanism, and related connectors for damage or debris.
Charger module replacement is high-voltage work for a qualified technician.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$500 – $2500
Labor$300 – $700
Onboard charger module replacement by a qualified technician. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2E35 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
5 of 5 — Ruling out the cable and wall side is easy; everything inside the charger is HV professional work.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →