P2D93

P2D93: Starter/Generator Phase Y Current Sensor Circuit High

DIY difficulty 5/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The generator or starter-generator in your hybrid system is reporting a high circuit signal. This unit both starts the engine and generates electricity, so faults here hit both.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 7 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. High-voltage safety first: this code lives in the high-voltage system, which can carry lethal voltage. Only touch it if you are trained and equipped for HV service (insulated tools, HV gloves, service-plug procedure); everyone else should stop at scanning and hand the repair to a qualified EV/hybrid technician.
  2. Scan all hybrid modules and record generator phase currents, excitation, and temperature PIDs. Tests: Failed phase current sensor (most common for phase codes)
  3. Check the generator's mechanical drive - belt condition and tension on belt-driven units. Tests: Generator bearing or mechanical wear
  4. Inspect the generator's HV and signal connectors for damage, corrosion, or coolant/oil contamination. Tests: Damaged wiring or connector at the generator
  5. Compare phase current readings; a phase that disagrees with the others points to its sensor or winding.
  6. Verify control and excitation circuits per the service manual before condemning the generator.
  7. Generator replacement is professional work on integrated units - get a written diagnosis first.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$400 – $2000
Labor$400 – $900

Starter/generator assembly replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2D93 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

5 of 5 — Diagnosis needs hybrid scan data and HV-safe practices; replacement of an integrated generator is a transmission-out level job.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →