P2D28

P2D28: Cold Start Propulsion Torque Performance

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

When the car is cold, it cannot make the driving torque the computer expects. Something in the hybrid drive system is underperforming until it warms up.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. High-voltage safety first: this code lives in the high-voltage system, which can carry lethal voltage. Only touch it if you are trained and equipped for HV service (insulated tools, HV gloves, service-plug procedure); everyone else should stop at scanning and hand the repair to a qualified EV/hybrid technician. Tests: Weak or imbalanced high-voltage battery, worst when cold (most common)
  2. Scan all hybrid/EV modules and record battery temperatures, state of charge, and available torque PIDs. Tests: Biased temperature sensor skewing the torque calculation
  3. Check whether the battery heater is working - a failed heater leaves the pack cold and weak. Tests: Failed battery pack heater
  4. Look at battery health and cell balance data; a weak or imbalanced pack sags most when cold. Tests: Weak or imbalanced high-voltage battery, worst when cold (most common)
  5. Check for software updates or technical service bulletins for cold-start torque calibration.
  6. If the pack is healthy and warm but torque still falls short, the motor or inverter needs deeper diagnosis.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$300 – $2500
Labor$300 – $600

Battery heater repair or battery health diagnosis and module service. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2D28 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Reading hybrid torque and battery PIDs is scan-tool work for a hybrid-capable tool; interpreting them takes experience.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →