P2CE9

P2CE9: Particulate Filter Pressure Sensor C Circuit Intermittent/Erratic

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your diesel measures how clogged its soot filter is with pressure sensors, and one of them (sensor C) is giving a bad reading. The car may regenerate the filter at the wrong times or warn unnecessarily. Usually the sensor, its hoses, or wiring.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor. Tests: Actual extreme DPF restriction skewing the reading (check soot load in live data)
  2. Check the DPF soot load in live data - a genuinely overloaded filter must be addressed before the sensor. Tests: Actual extreme DPF restriction skewing the reading (check soot load in live data)
  3. Inspect the pressure hoses to sensor C for clogging, melting, splits, or kinks. Tests: Clogged, melted, or split pressure sensing hose
  4. Inspect the sensor wiring and connector. Tests: Corroded connector or chafed wiring
  5. Replace the sensor if hoses and wiring check out, clear the code, and confirm plausible pressure readings on a drive.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$80 – $250
Labor$100 – $250

DPF pressure sensor C replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2CE9 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Hose inspection plus a sensor swap; the scan tool's soot-load reading guides the whole job.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →