P2C27

P2C27: Fuel Injector Group B Supply Sense Circuit Low

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your direct-injection system boosts voltage to fire the injectors, and the computer cannot verify that voltage on injector group B. Expect misfires or a no-start. Usually the boost circuit, its wiring, or the driver module.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor. - identify which cylinders are in group B and check for injector circuit codes too. Tests: Failed injector driver boost circuit or module (most common)
  2. Inspect the injector group B wiring, connectors, and the driver module. Tests: Failed injector driver boost circuit or module (most common)
  3. Test the injector supply/boost voltage per the factory service manual. Tests: Failed injector driver boost circuit or module (most common)
  4. Repair the wiring or replace the faulty injector/driver module, clear the code, and confirm clean running. Tests: Failed injector driver boost circuit or module (most common)

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$150 – $800
Labor$200 – $500

Injector driver module or wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2C27 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — High-voltage injection circuits - diagnose carefully with the service manual; some systems hold charge.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →