P2B40

P2B40: A Camshaft Position Actuator Position Sensor B Range/Performance Bank 1

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your engine moves its A camshaft timing on the fly, and the sensor confirming it moved is giving a bad reading on bank 1. Expect a check engine light and possibly rough running or poor economy. Usually the sensor or its wiring.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor. Tests: Actual phaser fault making the sensor read implausibly (check oil first)
  2. Check the engine oil level and spec - phasers are oil-driven. Tests: Low or wrong-spec engine oil affecting phaser movement
  3. Inspect the bank 1 A sensor wiring and connector for oil contamination. Tests: Damaged wiring or oil-contaminated connector
  4. Watch camshaft actual vs. commanded angle in live data. Tests: Failed position sensor B on the bank 1 A camshaft actuator (most common)
  5. Replace the sensor if it reads wrong with a healthy phaser, clear the code, and confirm the angles track.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$60 – $300
Labor$100 – $300

Camshaft position sensor replacement (A bank 1). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2B40 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Oil check first, then sensor testing; sensors are usually accessible on the head.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →