P2B10

P2B10: Cylinder 1 Injection Pulse Offset Not Learned

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your engine learns a correction for each fuel injector, and the one on cylinder 1 never finished learning its correction. This often follows an injector replacement, a battery disconnect, or an interrupted relearn.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor.
  2. Check whether the cylinder 1 injector was recently replaced or the battery was disconnected. Tests: Injector replaced on cylinder 1 without running the offset learn (most common)
  3. Verify battery voltage is healthy and stable. Tests: Learn procedure interrupted - low battery or engine stalled mid-learn
  4. Run the injector offset learn procedure for cylinder 1 with a capable scan tool per the service manual, keeping battery voltage stable. Tests: Injector replaced on cylinder 1 without running the offset learn (most common)
  5. Clear the code and confirm the learn completes and the engine runs evenly.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$0 – $700
Labor$80 – $500

Injector offset learn procedure (cylinder 1). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2B10 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Often a scan-tool learn procedure; if the injector is genuinely worn, replacement difficulty varies by engine.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →