P2B01

P2B01: Cylinder 2 Injection Pulse Performance

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your engine fine-tunes each cylinder's fuel injection, and cylinder 2 is not responding as expected. Expect a slight roughness or uneven running. Usually the injector is aging, or the fuel quality is affecting it.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor. - fix any misfire, compression, or ignition codes on that cylinder first. Tests: Compression or ignition weakness on that cylinder mimicking a fueling fault (rule out…
  2. Check injector balance and trim data for cylinder 2 in live data. Tests: Cylinder 2 injector aged - flow characteristic drifted (most common)
  3. Try a quality fuel system cleaner and a tank of good fuel first - drift is sometimes deposit-related. Tests: Fuel quality issues affecting injection
  4. If the cylinder stays out of tolerance, have the injector tested or replace the cylinder 2 injector, then clear the code and verify trims equalize. Tests: Cylinder 2 injector aged - flow characteristic drifted (most common)

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$150 – $700
Labor$150 – $500

Cylinder 2 fuel injector replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2B01 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Diagnosis is scan-tool data reading; injector replacement difficulty varies hugely by engine (diesel injectors are shop work).

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →