P2ADF

P2ADF: Intake Air System Leak Bank 2

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your engine is sucking in extra air through a leak on the bank 2 side of the intake - after the sensor that measures incoming air. Expect a rough idle, possible lean codes, and hissing. Usually a cracked hose, loose clamp, or split boot.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor. - note the fuel trim values; high positive trims confirm unmetered air.
  2. Visually inspect the bank 2 intake tract from the airbox to the manifold for cracks, loose clamps, and disconnected hoses. Tests: Cracked or split intake boot or hose on the bank 2 side (most common)
  3. Smoke-test the intake to pinpoint the leak.
  4. Repair or replace the leaking hose, boot, or gasket, clear the codes, and confirm fuel trims normalize. Tests: Leaking intake manifold gasket

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$20 – $200
Labor$80 – $250

Intake leak repair (hose, boot, or gasket). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2ADF ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Leak-finding with a smoke machine, then usually a hose or clamp - very DIY-friendly.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →