P2A96

P2A96: Alternative Fuel Tank Select Valve B Control Circuit Performance

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your CNG/LPG system has electrically controlled valves that switch fuel sources, and the one called the alternative fuel tank select valve b is not behaving. The system will usually just stay on regular gasoline until it is fixed - annoying, not dangerous. A stuck valve, tired solenoid, or wiring fault is the typical cause.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor. Tests: Low system voltage or poor ground starving the solenoid
  2. Locate the alternative fuel tank select valve b and inspect its wiring and connector for corrosion, heat damage, or loose pins. Tests: Failed alternative fuel tank select valve b solenoid or valve (most common - they stick…
  3. With the system commanded on, listen and feel for the valve clicking - a silent valve with good wiring points at the solenoid itself. Tests: Failed alternative fuel tank select valve b solenoid or valve (most common - they stick…
  4. Test the solenoid coil and its control circuit per the factory service manual. Tests: Damaged wiring or corroded connector in the valve control circuit
  5. Replace the alternative fuel tank select valve b if it tests bad, clear the code, and confirm the system switches fuels normally.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$80 – $400
Labor$120 – $300

Alternative fuel tank select valve B replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2A96 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Alt-fuel valves are simple electrical parts, but they live around pressurized fuel - diagnose the electrics yourself and let a qualified shop handle any fuel-line opening.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →