P2A19

P2A19: Injection pump fuel metering control D high

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your diesel's injection pump meters fuel through several internal paths, and the computer found a high signal on channel D. The engine may run rough, lack power, or be hard to start. This is inside the high-pressure fuel system, so it is shop-level diagnosis.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Read the code with a scan tool and save the freeze-frame data, then check for companion codes - when several sensor codes appear together, suspect a shared reference-voltage or ground problem before any single sensor.
  2. Check fuel quality and the fuel filter first - contaminated fuel is a common root cause of metering faults. Tests: Fuel contamination (water, wax, or debris) affecting the metering element
  3. Inspect the wiring and connectors at the injection pump for channel D for corrosion, chafing, and loose pins. Tests: Damaged wiring or corroded connector to the pump actuator
  4. Have a diesel shop run actuator and rail-pressure tests with a capable scan tool; metering faults often need pump-bench-level diagnosis. Tests: Metering actuator for channel D worn or sticking (most common)
  5. Repair the wiring or replace the actuator/pump as diagnosed, then clear the code and verify rail pressure control on a test drive.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$400 – $1800
Labor$400 – $1000

Injection pump metering actuator or pump replacement (channel D). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2A19 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — High-pressure diesel fuel work plus pump-level diagnosis - this is professional territory, not driveway work.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →